![](https://primary.jwwb.nl/public/o/q/c/temp-lwnqphardxdxdlzriokk/ryg1ak/pxl_20230710_033843887.jpg?enable-io=true&enable=upscale&crop=1142%2C1522%2Cx0%2Cy0%2Csafe&width=376&height=501)
Let's make a t-shirt using HTV from Heat Transfer Warehouse.
Step 1: Create the design you want to put on the shirt. I used the program for my Cricut Maker.
![](https://primary.jwwb.nl/public/o/q/c/temp-lwnqphardxdxdlzriokk/hw94mj/pxl_20230709_194113827mp.jpg?enable-io=true&enable=upscale&crop=878%2C1170%2Cx0%2Cy0%2Csafe&width=386&height=514)
Step 2: Send pattern to the Cricut. Make sure you have it mirrored!
![](https://primary.jwwb.nl/public/o/q/c/temp-lwnqphardxdxdlzriokk/x342uf/pxl_20230709_194213751.jpg?enable-io=true&enable=upscale&crop=1448%2C1087%2Cx1%2Cy0%2Csafe&width=478&height=359)
![](https://primary.jwwb.nl/public/o/q/c/temp-lwnqphardxdxdlzriokk/o0zuxp/pxl_20230709_194849727.jpg?enable-io=true&enable=upscale&crop=1028%2C1371%2Cx0%2Cy0%2Csafe&width=478&height=638)
Step 3: When cutting pattern out, I cut it on Everyday Iron-on setting.
Step 4: Place vinyl, color side down, on the cutting mat.
![](https://primary.jwwb.nl/public/o/q/c/temp-lwnqphardxdxdlzriokk/znhiz5/pxl_20230709_194320690.jpg?enable-io=true&enable=upscale&crop=1632%2C2175%2Cx0%2Cy1%2Csafe&width=478&height=637)
Step 5: Cut
Step 6: Weed
![](https://primary.jwwb.nl/public/o/q/c/temp-lwnqphardxdxdlzriokk/qbht23/pxl_20230709_203308432.jpg?enable-io=true&enable=upscale&crop=1918%2C1440%2Cx1%2Cy0%2Csafe&width=478&height=359)
Step 7: Heat up your heat press.
Step 8: I press the shirt to get out any wrinkles.
Step 9: I use a lint roller to remove any hair from the shirt.
Step 10: Press
![](https://primary.jwwb.nl/public/o/q/c/temp-lwnqphardxdxdlzriokk/nqnnqa/pxl_20230710_033843887-1.jpg?enable-io=true&enable=upscale&crop=1142%2C1522%2Cx0%2Cy0%2Csafe&width=478&height=637)